Manual Configuration - D-Link GO-RTW-N300 User Manual

Section 2 - Setting Up With a Web Browser - Router Mode

Manual Configuration

This section will show you how to configure your new D-Link wireless router using the web-based configuration utility.
This section describes the configuration interface for Router
RT
Mode. Make sure that the mode selector switch is in the Router
position (RT) on your GO-RTW-N300.
To access the configuration utility, open a web-browser such
as Internet Explorer and enter the IP address of the router
(192.168.0.1).
Enter admin in the User Name field. By default, the password
should be left blank.
If you get a Page Cannot be Displayed error, please refer to the
Troubleshooting section for assistance.
D-Link GO-RTW-N300 User Manual 15