Windows Vista - D-Link GO-RTW-N300 User Manual

Section 3 - Connecting a Wireless Client
Windows Vista®
Windows Vista® users may use the built-in wireless utility. If you are using another company's utility or Windows® 2000, please
refer to the user manual of your wireless adapter for help with connecting to a wireless network. Most utilities will have a "site
survey" option similar to the Windows Vista® utility as seen below.
If you receive the Wireless.Networks.Detected bubble, click on
the center of the bubble to access the utility.
or
Right-click on the wireless computer icon in your system tray
(lower-right corner next to the time). Select Connect.to.a.network.
The utility will display any available wireless networks in your
area. Click on a network (displayed using the SSID) and click the
Connect button.
If you get a good signal but cannot access the Internet, check you
TCP/IP settings for your wireless adapter. Refer to the Networking.
Basics section in this manual for more information.
D-Link GO-RTW-N300 User Manual 79