Technical Features And Specifications; Interface Frequency - BenQ 18.5 wide LCD Monitor User Manual

Technical Features and Specifications

Item
Display Size
Panel
Pixel Pitch
Resolution (max.)
Analog
Connector
Digital
Tilt Tilt Angle
Dimensions
Net
(W x H x D)
Weight Net
AC
Power
Consumption
Speaker
Temperature
Operating
Condition
Humidity
Altitude
Temperature
Storage
Humidity
Condition
Altitude
Description
409.8(H)x230.4(V)mm
0.3(H)*0.3(V)mm
1366*768
D-sub
DVI-D(Optional)
-
5°~22°
443（W）x 361(H)x 71（D）mm
3.6kg
AC
100~240V, 50Hz/60Hz,1.2A
Active:<25W/Standby:<2W
1W*2
0°C to 40°C
20% to 80% (No Condensation)
Under 10,000 fts
-20°C to 60°C
5% to 80% (No Condensation)
Under 30,000 fts

Interface Frequency

1. The following frequency range is the working period. If the entered mode between below
period but not match the frequency of supported timing, display optimization would not be
assured. If the entered mode is out of the working period, the display will be blanking
(just show "Input Not Supported") then go to power saving.
2. Basically, mode judgment is regardless the sync polarity except both or more modes that
are all belong to the supported timing list and could be judged by sync polarity only.
3. In the meantime, real entered frequency of the supported timing is not requested exactly.
4. Normalization of VGA card' s deviation will be acceptable.
5. Horizontal Frequency 30 ~ 83KHz
6. Vertical Frequency
50 ~ 76Hz(T900HD&T900HDA); 56 ~ 76Hz(T902HD&T902HDA).
- 7 -