PRESONUS StudioLive 16.0.2 Owner's Manual page 219

7 Studio One Artist Quick Start
7.2 Configuring MIDI Devices
5. From the menu on the left, select New Keyboard. At this point, you can customize
6. You must specify which MIDI channels will be used to communicate with
7. In the Receive From drop-down menu, select the MIDI-interface input
8. In the Send To drop-down menu, select the MIDI interface output (PreSonus
9. If this is the only keyboard that you will use to control your external
10. Click OK.
the name of your keyboard by entering the manufacturer and device names.
this keyboard. For most purposes, you should select all MIDI channels.
If you are unsure of which MIDI channels to choose, select all 16.
from which Studio One Artist will receive MIDI data. If you are using
the StudioLive 16.0.2 MIDI I/O, select PreSonus FireStudio Port 1.
FireStudio, for StudioLive 16.0.2 owners) from which Studio One Artist will
send MIDI data to your keyboard. If your keyboard controller does not need
to receive MIDI data from Studio One, you can leave this unselected. If your
keyboard does need to receive MIDI data, you must connect a MIDI cable
from the MIDI Out of the MIDI interface to the MIDI In of the keyboard.
synthesizers and virtual instruments, you should check the box next
to Default Instrument Input. This will automatically assign your
keyboard to control all MIDI devices in Studio One Artist.
If you have a sound module that you'd like to connect, leave the
External Devices window open and proceed to the next section.
If not, you can close this window and skip to Section 7.3.
StudioLive Software Library
™
Reference Manual
113