Zephyr Venezia ZVE-E30AS Use, Care And Installation Manual page 12

Ductless recirculating is intended for applications where an exhaust duct work is not possible to be installed.
When converted, the hood functions as a recirculating hood rather than an exhaust hood. Fumes and exhaust
from cooking are drawn and ltered by a set of optional charcoal lters. The air is then puri ed and re-
circulated back within the home.
We recommend to ALWAYS exhaust air outside of the home by employing existing or installing new duct
work, if possible. The hood is most effective and ef cient as an exhaust hood. Only when the exhaust option
is not possible should you recourse to converting the hood into a recirculating hood.
When converted to be a recirculating hood, a set of charcoal
Filter set. Order according to its Part number below. The standard Metal Filters are intended to capture
residue from cooking and the optional charcoal
circulation.
RECIRCULATING KIT (REQUIRED IF NO DUCTING IS USED)
Kit includes charcoal lters and air diverter plate.
Hood Model
ZVE-E30AS
ZVE-E36AS/E42AS
1. Secure air diverter plate to wall below duct cover wall bracket.
FIG.1 See manual included with recirculating kit for more
detailed instructions.
2. Remove metal mesh lters from hood. Clip charcoal lters
onto charcoal lter bracket built into hood. FIG.2
3. Re-install metal mesh lters.
4. Turn on charcoal lter change indicator on control panel. (refer
to details on page 12.) The microprocessor in the controls will
indicate the need to change the charcoal lter after 120 hours
of continuous use. Order replacement charcoal lters with per th e
list below.
Charcoal Filter Replacements
Hood Model
ZVE-E30AS
ZVE-E36AS/E42AS
DO NOT WASH CHARCOAL FILTERS. Charcoal lters may need
to be changed more often depending on cooking habits.
Charcoal Filter Dimensions:
9in x 6 3/8in
228mm x 162mm
lters help to purify fumes exhausted from cooking for re-
Part No. Filters in Pkg.
ZRC-0050 2
ZRC-0051 3
Part No. Qty to Order
Z0F-C022 2
Z0F-C022 3
10
www.zephyronline.com
lters are required on top of its standard Metal
6" round duct
FIG.1
D
Install charcoal filter (plastic side exposed)
into filter bracket. Insert tab cut-out side D
of charcoal filter into bracket first. Lock
charcoal filter into place by pushing down
on side E with locking tabs.
FIG.2
air diverter
plate
E