Electrical - Yardworks 060-3808-8 Owner's Manual

ELECTRICAL

WARNING:
TO AVOID ELECTRICALHAZARDS, FIRE HAZARDS, OR DAMAGE TO THE TOOL, USE
PROPER CIRCUITPROTECTION. YOUR EDGER IS WIRED ATTHE FACTORYFOR 120 V
OPERATION. CONNECTTO A120 V, 15 ACIRCUITAND USE A15 ATIME DELAYED FUSE
OR CIRCUITBREAKER. TO AVOID SHOCK OR FIRE WHEN THE POWER CORD IS
WORN, CUT, OR DAMAGED IN ANYWAY, REPLACE IT IMMEDIATELY.
DOUBLE INSULATED (See Figure 1.)
This edger has a plug that looks like the one shown in Fig. 1.
The edger is double insulated toprovide a double thickness of insulationbetween you and the
tool's electricalsystem. Allexposed metal parts areisolated from the internal metal motorcom-
ponents with protective insulation.
WARNING:
TO AVOID INJURY, WHEN SERVICING THE EDGER USE ONLY
IDENTICAL REPLACEMENT PARTS.
WARNING:
SAFETY PRECAUTIONS WHEN OPERATING THIS TOOL.
WARNING:
1. Use only identical replacement parts when servicing a tool with double insulation.
Servicing should be performed by a qualified technician.
2. Do not use in wet or damp areas or expose to rain.
GROUNDING INSTRUCTIONS
IN THE EVENT OF A MALFUNCTION OR BREAKDOWN, grounding provides the path of least
resistance for electric current and reduces the risk of electric shock. This tool is equipped with
an electric cord that has a POLARIZED plug.The power cord MUST be plugged into a
matching outlet that is properly installed and grounded in accordance with ALL local codes and
ordinances.
DO NOT MODIFY THE PLUG PROVIDED. If it will not fit the outlet, have the proper outlet
installed by a qualified electrician.
CAUTION:
IN ALL CASES, MAKE CERTAIN THE RECEPTACLE IN QUESTION IS
PROPERLY GROUNDED. IF YOU ARE NOT SURE, HAVE A CERTIFIED ELECTRICIAN
CHECK THE RECEPTACLE.
DOUBLE INSULATION DOES NOT TAKE THE PLACE OF NORMAL
TO AVOID ELECTRIC SHOCK:
1) 2-prong plug
2) Properly grounded extension cord
9
Fig. 1