Yardworks 060-3808-8 Owner's Manual page 19

OPERATION
ADJUSTING DEPTH OF CUT (See Figures 8-9.)
The front wheel can be adjusted to allow a deeper or shallower cut, and to increasethe life of
the blade. Change the edging depth from the shipping position to your desired depth by:
 Wait for blade to come to acomplete stop.
 UNPLUG TOOL.
 Loosen the adjusting knob and move the wheel up to increase the depth or down to
decrease the depth.
 After adjustment is complete, tighten the adjusting knob securely.
NOTE: Adjust the blade depth from 1/2 in. to 1 in. deep initially. Make a shallow cut to test the
cutting depth. If the cutting depth needs adjusting, this should be done progressively until the
desired depth is reached. To increase blade life span, keep initial cutting depth at minimum
and increase depth setting only as blade wears.
WARNING:
Thick overgrowth may drag on the guard. Reduce cut depth to minimumto
help reduce this affect.
TO DECREASE
DEPTH
BLADE
DEPTH
CURB
TO INCREASE
DEPTH
19
ADJUSTING
KNOB
BLADE
Fig. 8
Fig. 9