Assembly - Yardworks 060-3808-8 Owner's Manual

ASSEMBLY

ASSEMBLING THE FRONT WHEEL (See Figure 4.)
Before using the edger, a one-time assembly is required. When removed from the box, the
front wheel is as shown above (A).
1. Screw off the adjusting knob from the hole (1).
2. Put down the front wheel.
3. Insert the adjusting knob into the hole (2) and tighten it.
(B)
(1)
(2)
ADJUSTING
KNOB
(A) (C)
Fig. 4
14