Yardworks 060-3808-8 Owner's Manual page 16

OPERATION
STARTING AND STOPPING (See Figure 5.)
To start the motor:
 Plug the edger into an AC power outlet.
 Press and hold the Lock-off button and squeeze the switch trigger. The edger will stay ON
as long as the trigger switch is squeezed.
To stop the motor:
 Release the switch trigger.
 Allow at least 5 seconds for blades to stop rotating.
 The edger will be locked OFF until you press the Lock-off button again.
LOCK-OFF
BUTTON
SWITCH
TRIGGER
OUTLET
END
CORD
RETAINER
Fig. 5
16