Bizfon Manual II: Administrator's Guide
Firmware Update
This window allows to update the software of Bizfon by installing new firmware called image. To learn more about new firmware available, please
contact Bizfon Technical Support.
Updating a new firmware requires a perfectly working power supply. Therefore Bizfon is provided with a battery (accumulator). If the battery is low or
simply absent the "There is no battery or voltage is low" warning is displayed
Please Note:
Installing new firmware will take about 15
minutes. During this time, the Bizfon, telephony and Internet
access will be disabled.
The firmware update will cause the loss of the following
data:
•
All internally stored voice mails and custom voice
messages
•
DHCP leases
•
Transfer statistics
•
Call statistics
•
All pending events
•
User specific GUI states
The following main processes will be stopped during the
firmware update and will be restarted afterwards:
•
Voice Software
•
Network Time Protocol Daemon
•
Network Interface Statistic Daemon
•
Dynamic DNS Daemon
Please Note:
If you consider the
the displayed tables to be important, it is recommended to
download them from the corresponding page prior to
starting the Firmware Update.
Next will move you to the second page of Firmware Update
where the image file should be selected.
The second page of Firmware update has the Browse
button used to browse the image file, and the Specify
Image text field that will display the selected image
filename.
Pressing Save will start uploading the image file to the
board. The next page will be displayed, showing the result
of a verification of the image being burned.
Bizfon4000 (SW Version 3.1.x)
Call Statistics
entries in
Administrator's Menus
Fig. II-37: Firmware Update page 1
Fig. II-38: Firmware Update page 2
23