Download Print this page

Connecting Your Monitor For Analog - IBM ThinkVision L191p User Manual

Ibm user's guide monitor l191p
Hide thumbs

Advertisement

Connecting your Monitor for Analog

Be sure to read the 'Safety
Information' at the front of
this User Guide before
carrying out this procedure.
1.
Turn off your computer and all attached devices.
2.
Connect the signal cable to the video port on the back of your computer.
This port might be directly attached to your computer (figure A), or it
might be part of a video adapter card (figure B). The video port on your
computer or video adapter card might be blue to match the blue
connector on your monitor's video cable.
3.
Connect the power cord to the power port on the back of your monitor if
the power cord supplied is not attached to the monitor. Then insert the
plug into a properly grounded electrical outlet.
7

Advertisement

loading

  Related Manuals for IBM ThinkVision L191p

This manual is also suitable for:

6135ab1