IBM ThinkVision L191p User Manual page 24

OSD Icon on
Main Menu
Image Setup
•
•
Image
Properties
1. Mode 1
•
•
•
2. Mode 2
(Custom)
•
•
•
1. Mode 1
2. Default
3. Mode 2
Input video signal
22
Submenu Description
Activates automatic image adjustment.
Automatic
Use the
If satisfactory results are not obtained using the Phase
adjustment, use the Clock adjustment and then use Phase
Manual
again.
Clock
Phase
Adjusts intensity of red, green and blue.
Color
(Preset Mode)
6500K adjusts the screen more red.
6500K
7200K adjusts the screen to the default color settings.
7200K
9300K adjusts the screen more blue.
9300K
Increases or decreases 'red'.
Red
Increases or decreases 'green'.
Green
Increases or decreases 'blue'.
Blue
Sharpness
adjusts the image softer.
returns the image sharpness to the default settings.
adjust the image sharper.
This monitor can accept video
signals through two different
connectors.
Most desktop computers use a
D-SUB connector. Select
digital among OSD Controls
when you use DVI connector.
Controls and
Adjustments (Analog)
or
button to adjust away the interference.
1 - selects D-SUB
(Analog)
2 -selects DVI-Digital
Controls and
Adjustments (Digital)
Controls Locked
Same as Analog
Same as Analog
Same as Analog