Checking Drive Belts - Hyundai Getz Owner's Manual

6- 22
DO-IT-YOURSELF MAINTENANCE
G190A01A-GAT

CHECKING DRIVE BELTS

(Gasoline)
1.1L
Water Pump Pulley
Alternator
9.5 ~11.0 mm
(0.37 ~ 0.43 in.)
Crankshaft pulley
1.4L/1.6L
Water Pump Pulley
5.1~6 mm
(0.2~0.24 in.)
Crankshaft Pulley
Drive belts should be checked periodi-
cally for proper tension and adjusted if
necessary. At the same time, belts
should be examined for cracks, wear,
fraying or other evidence of deteriora-
tion and replaced if necessary.
Belt routing should also be checked to
be sure there is no interference be-
tween the belts and other parts of the
engine. After a belt is replaced, the
new belt should be adjusted again
after two or three weeks to eliminate
slack resulting from initial stretching
after use.
HTB220
Alternator
Pulley
HTB186
G190B01TB-GAT
CHECKING DRIVE BELTS
(Diesel)
Water pump pulley
Tensioner
Alternator
Crankshaft pulley
A/C comp.
At the scheduled maintenance inspec-
tion, belts should be examined for
cracks, wear, fraying or other evidence
of deterioration and replaced if neces-
sary.
Belt routing should also be checked to
be sure there is no interference be-
tween the belts and other parts of the
engine.
Power
steering
pump
G190B01TB