Changing The Airconditioner Filter - Hyundai Getz Owner's Manual

G140C01A-AAT
Lubrication
To lubricate the compressor and the
seals in the system, the air condition-
ing should be run for at least 10 min-
utes each week. This is particularly
important during cool weather when
the air conditioning system is not oth-
erwise in use.
G140D01TB-GAT
Checking the Compressor Drive
Belt
1.1L
Power steering
Crank pully
5 ~ 5.5 mm (0.19 ~ 0.21 in.)
1.4/1.6L
TENSION PULLEY
When the air conditioning is being used
regularly, the compressor drive belt
tension should be checked at least
once a month.
To check the drive belt tension, press
down on the belt halfway between the
engine crankshaft and compressor
A/C pully
pulleys. Pressing with your finger, you
should not be able to deflect this belt
anymore than 8.0 mm (1.1L: 5~ 5.5
mm). If you have the instruments to
check it with a force of 98N (22 lb.), the
deflection should be approx. 8.0 mm
G140D01TB (0.315 in.). If the belt is too loose, have
it adjusted by your Hyundai dealer.
A/C
8mm
(0.315 in.)
CRANK PULLEY
HTB219
DO-IT-YOURSELF MAINTENANCE
B145A02TB-GAT
CHANGING THE AIR CONDI-
TIONER FILTER (In Front of
evaporator unit) (If Installed)
The air conditioner filter is located in
front of the evaporator unit behind the
glove box.
It operates to decrease pollutants en-
tering the car.
1. Remove the adjusting pins on both
sides of the glove box to open half
the glove box.
6- 19
HTB290