Hood Release - Hyundai Getz Owner's Manual

B570A03A-GAT

HOOD RELEASE

1. Pull the release knob to unlatch the
hood.
2. Push the secondary latch lever to
the left and lift the hood.
3. Pull the support rod from the hood.
HTB070
4. Hold the hood open with the support
rod.
HTB2003
FEATURES OF YOUR HYUNDAI
Before closing the hood, return the
support rod to its clip to prevent it from
rattling. Lower the hood until it is about
30 cm (1 ft.) above the closed position
and let it drop. Make sure that it locks
into place.
!
CAUTION:
Make sure that the support rod has
been released prior to closing the
HTB308
hood.
!
WARNING:
o Always double check to be sure
that the hood is firmly latched
before driving away. If it is not
latched, the hood could fly open
while the vehicle is being driven,
causing a total loss of visibility,
which might result in an acci-
dent.
o The support rod must be inserted
HTB288
completely into the hole provided
in the hood whenever you in-
spect the engine compartment.
This will prevent the hood from
falling and possibly injuring you.
1- 77