Table of Contents
Advertisement
BA_CETA106_EbV_EN_0450021003_0950-10.book Seite 11 Freitag, 11. Dezember 2009 1:16 13
Parameter description
Display
Designation
06:02
Room day
06:03
Room night
06:04
Operating mode
06:05
Time program
06:06
Type of reduced
operation (ECO/RED)
Description
Setting range:
5 ... 30°C
Factory setting: 30°C
Function:
The set temperature is the room setpoint during active cycles of
operation in AUTOMATIC mode and during HEATING mode.
Setting range:
5 ... 30°C
Factory setting: 16°C
Function:
The set temperature is the room setpoint between the cycles of
operation in AUTOMATIC mode and during RED. HEATING mode.
Setting range:
1: Automatic
2: Heating
3: Red. heating
4: Standby
Factory setting: 1
Function:
Automatic:
Heating circuit operates in Heating or
Red. heating mode according to the time
program assigned under 06:05
Heating:
Heating circuit operates continuously
according to set room day temp. (06:02)
Red. heating:
Heating circuit operates continuously
according to set room night temp. (06:03)
under consideration of 06:06
Standby:
Frost-protected switch-off of heating circuit
Setting range:
1: Time program 1
2: Time program 2
3: Time program 1 and 2
Factory setting: 1
Function:
Depending on the setting, the heating circuit operates according
to time program 1, 2 or both, as set in menutree 02 (time
programs).
Setting range:
0: ECO
1: RED
Factory setting: 0
Function:
The settings are effective in Red. heating operating mode.
ECO:
Frost-protected switch-off mode
RED:
Reduced mode
11
Advertisement
Table of Contents
