Page 1
User's Guide TL-SL1109 µ ÷ Ö Æ ½ â µ ÷ Æ ÷ 8+1G Gigabit Ethernet Switch TL-SL1117 µ ÷ Ö Æ ½ â µ ÷ Æ ÷ 16+1G Gigabit Ethernet Switch TL-SL1226 µ ÷ Ö Æ ½ â µ ÷ Æ ÷...
Page 2
In compliance with the EMC Directive 89/336/EEC, Low Voltage Directive trademark of TP-LINK Technologies Co., Ltd. Other brands and product 73/23/EEC, this product meets the requirements of the following standards: names are trademarks or registered trademarks of their respective holders.
2.2 Mounting the Switch in a Rack..............3 Note: If any of the above contents is damaged or missing, please contact 2.3 Power on....................4 the retailer from whom you purchased the TL-SL1109/TL-SL1117/TL-SL1226 Chapter 3: Identifying External Components............4 Gigabit Ethernet Switch for assistance.
Before place the Switch on a desk, attach four rubber footpads to the flutes on the Switch bottom, then lay the Switch on the desktop, where can be have as The TP-LINK TL-SL1109/TL-SL1117/TL-SL1226 is plug-and-play and no much as 5kg placed on top.
100-240V 50-60Hz 0.6A Power on Figure 3-2 TL-SL1226 Switch Rear Panel sketch TL-SL1109/TL-SL1117/TL-SL1226 Gigabit Ethernet Switch is powered by AC power supply. Powering on the Switch, it will automatically initialize and its LED indicators LED indicators should respond as follows:...
Appendix C: Contact Information Transfer Method Store-and-Forward MAC Address Learning Automatically learning, automatically Update For help with the installation or operation of the TP-LINK TL-SL1109/TL- Frame Filter Rate 10Base-T: 14880pps/Port SL1117/TL-SL1226 Gigabit Ethernet Switch, please contact us. 100Base-Tx: 148800pps/Port E-mail: support@tp-link.com...