Configuration Page - Netlinx Settings Tab; Setting The Icsp Connection To The Netlinx Master - AMX Metreau Entry Communicator with Display MET-ECOM-D Operation/Reference Manual

Configuration Page - NetLinx Settings Tab

Select the NetLinx Settings tab of the Configuration page to access the NetLinx Settings tab (FIG. 33).
Use the options in this tab to view and edit the ICSP connection to the NetLinx master.
FIG. 33 Configuration Page - NetLinx Settings tab
Configuration Page - NetLinx Settings Tab
Connection
Mode
System Number
Device Number
Master IP/URL
Master Port Number The ICSP socket port number.
Username
Password
Friendly Name

Setting the ICSP Connection to the NetLinx Master

1. In the Configuration page, select the NetLinx Settings tab.
2. Enter the system number assigned to the ICSP system.
3. Enter the device number to be assigned to the Metreau Entry Communicator in the Device Number
field.
4. Enter the IP address of the master that the Metreau Entry Communicator is to connect with in the
Master IP/URL field.
Metreau Entry Communicators
Displays the ICSP connection status (Not Connected / Connected).
Master connection mode:
• URL(TCP) - The device connects to the specific IP/URL of a master via a TCP
connection.
• Auto - The device connects to the first master that responds. This setting requires you
set the System Number.
• Listen - The device "listens" for the master to initiate contact. This setting requires you
provide the master with the device's IP.
The ICSP system number.
The ICSP device number.
IP or URL of master for URL master connection mode
The ICSP network username (required if the NetLinx master is encrypted).
The ICSP network password (required if the NetLinx master is encrypted).
The friendly name of the device as it appears in the NetLinx master connection tree.
Using the Configuration Manager
39