Configuration Page; Configuration Page - Network Ip Settings Tab - AMX Metreau Entry Communicator with Display MET-ECOM-D Operation/Reference Manual

Configuration Page

Click the Configuration command button to access the Configuration page (FIG. 32). This page
contains three tabs:
IP Settings (initial view): Use the options in this tab to specify Network IP settings (see
below).
NetLinx Settings: Use the options in this tab specify the ICSP connection to the NetLinx
master (see the Configuration Page - NetLinx Settings Tab section on page 39).
User Settings: Use the options in this tab to set the Username and Password for access to the
Metreau Entry Communicators web server pages (see the Configuration Page - User Settings
Tab section on page 40).

Configuration Page - Network IP Settings Tab

Select the IP Settings tab of the Configuration page to access the Network IP Settings tab (FIG. 32). Use
the options in this tab to set IP and DNS addresses for the Metreau Entry Communicator.
FIG. 32 Configuration Page - Network IP Settings tab
The IP address can be either a static or dynamic assignment.
Metreau Entry Communicators
Using the Configuration Manager
37