CONNECTING TO MONITOR
Connect the Video OUT port on the rear panel of the camera to a monitor.
VIDEO
CLASS 2 ONLY
Camera
As the connecting method varies with the instruments, refer to the manual supplied
with the instrument.
Only connect the cable when the power is turned off.
CONNECTING TO POWER
Since power specifications differ depending on the model, make sure to check your model name
and specifications before connecting power.
You can connect power as shown in the following figure.
For AC / DC power
•
Since SCB-2005 the power specification supports
both AC and DC, connect AC 24V, 500mA Adaptor
or DC 12V, 500mA Adaptor.
POWER
Monitor
SCB-2005
POWER
VIDEO
CLASS 2 ONLY
Power
English_15