installation & connection
connectinG witH otHer Device
The BNC Out terminal of the product is provided for easier installation, and is not recommended
`
J
for monitoring purposes. If you keep the BNC cable connected, a risk of lightening may cause
damage or malfunction to the product.
ethernet connection
Connect the Ethernet cable to the local network or to the Internet.
power Supply
Use the screwdriver to connect each line (+, –) of the power cable to the corresponding
power port of the camera.
Be careful not to reverse the polarity when you connect the power cable.
`
J
You can also use a router featuring PoE (Power over Ethernet) to supply power to the camera.
If both PoE and DC 12V are supplied, the product will operate with the first-applied power source.
`
Please make sure the monitor and camera are turned off when connecting them.
`
20_ installation & connection
AUDIO OUT
AUDIO IN
SD CARD
SD CARD
SD CARD
SD SYSTEM POWER
RESET
VIDEO
NETWORK
1 2 3 4 5 6
1 : ALARM IN
4 : GND
ACT
LINK
AC 24V
2 : ALARM OUT 5 : RS-485+
DC 12V
GND
3 : ALARM COM 6 : RS-485-
Ethernet
Monitor
+
Power