Lubricant Specifications - Ford 2004 Focus Owner's Manual

Maintenance and Specifications
Some transmission fluids may be labeled as dual usage, such as
MERCON and MERCON V. These dual usage fluids are not to be used
in an automatic transmission that requires use of the MERCON type
fluid. However, these dual usage fluids may be used in transmissions that
require the MERCON V type fluid.
MERCON and MERCON V type fluids are not interchangeable.
DO NOT mix MERCON and MERCON V. Use of a transmission
fluid that indicates dual usage (MERCON and MERCON V) in
an automatic transmission application requiring MERCON may
cause transmission damage. Use of any fluid other than the
recommended fluid may cause transmission damage.
3
Approximate dry fill capacity including transmission fluid cooling
system, actual refill capacities will vary based on vehicle application and
transmission fluid cooling system (i.e. coolers size, cooling lines. auxiliary
cooler capacities). The amount of transmission fluid and fluid level
should be set by the indication on the dipstick's normal operating range.
4
Use of synthetic or synthetic blend motor oil is not mandatory. Engine
oil need only meet the requirements of Ford specification
WSS-M2C153–H and the API Certification mark.

LUBRICANT SPECIFICATIONS

Ford Part
Item Name or
Equivalent
Brake fluid Motorcraft High
Performance
DOT 3 Motor
Vehicle Brake
Fluid
Door latch, hood Multi-Purpose
latch, auxiliary Grease
hood latch,
trunk latch, seat
tracks.
Lock cylinder Penetrating and
Lock Lubricant
210
2004 Focus (foc)
Owners Guide (post-2002-fmt)
USA English (fus)
Ford Part Ford
Number Specification
PM-1 ESA-M6C25-A
and DOT 3
XG-4 or XL-5 ESR-M1C159-A
or
ESB-M1C93–B
XL-1 none