D2 Board Removal (Kdl-46S3000 Only); Replacing The Inverter Connector Assembly (Kdl-46S3000 Only) - Sony KDL-26S3000 Service Manual

1-10. D2 BOARD REMOVAL (KDL-46S3000 ONLY)

1
Disconnect 3 connectors
2
Remove 4 screws, +PSW 3SG

1-10-1. REPLACING THE INVERTER CONNECTOR ASSEMBLY (KDL-46S3000 ONLY)

Use the following procedure to confirm that the Inverter connector is securely attached
to the board.
1
After inserting the connector
into the board, push the
middle section of the inverter
connector to confirm it
is securely connected.
KDL-26S3000/32S3000/40S3000/46S3000
1
D2 Board
D2 Bracket
2
Push the right section of
the inverter connector and
confirm it is securely
connected.
KDL-26S3000/32S3000/40S3000/46S3000
2
3
Push the left section of
the inverter connector and
confirm it is securely
connected.
17