Sony KDL-26S3000 Service Manual page 30

KDL-40S3000 ONLY
U1 BOARD (CONTINUED)
KDL-26S3000/32S3000/40S3000/46S3000
3
1
KDL-26S3000/32S3000/40S3000/46S3000
OPERATION PROCESS
1. Wire route ESD GND wire as shown
(NOTE: Actual Part will have BLUE insulation)
2. Use 3x12mm screw to fix ring terminal in
U1 Bracket
3. Apply Sheet Core C to hold cable on panel.
Use Bottom of "score line" and "Dimple"
on panel ase guide for aligning tape.
TORQUE SPECIFICATION
3mm TORQUE: 6.0kg-cm (+-1.0kg-cm)
2
67