Fan Mode - Pearl DLC-C003 Operator's Manual

group number. If you are using the graphics tablet you just press one
button on the tablet and all the fixtures in the group are magically
selected.
Making a group
Select the fixtures or dimmer channels you want to put into the
group
Press the ML Menu button, then E [Record Group].
Type the group number 1-200 on the numeric keypad and press
Enter.
Once you have created a group, you can then quickly select all the
fixtures in the group:
Selecting a group of fixtures
Type the group number on the keypad
Press A [Recall Group].
The fixtures in the group are selected, all other fixtures are
deselected.
If you are using the graphics tablet, you can save and recall groups
with one touch of the pen. This is described in more detail in the
Graphics Tablet chapter.
3.5 Copying settings from other fixtures – Align
If you've set a nice colour on one of your fixtures, and you want to
copy it to all the other fixtures of the same type, the DLC-C003's Align
function can do that. You can also use it to make all pan and tilt
positions the same for a range of units or to make dimmer levels the
same.
Copying settings from other fixtures
Press an attribute button to select the attribute you want to copy
Select the fixture or dimmer channel you want to copy from
Select the fixtures or dimmer channels you want to copy to
Press the ML Menu button, then D [Align <attribute name>]".
Or you can press C [Align Fixtures], to align all attributes.
3.6

Fan mode

Fan mode automatically spreads out a selected range of fixtures to
produce a fan of light beams, like rays of sunlight. The first and last
fixtures of the range are affected most, and the central fixtures are
affected least. The amount of fan can be set using the wheels.
Note: The order in which you select the fixtures sets how the fan effect
works. The fixtures you select first and last will be the ones
which change most.
The fan effect, while normally used on pan or tilt attributes, can be
applied to any attribute.
Page 17 of 163