Deleting A Step From A Chase; Copying Chases; Deleting Chases - Pearl DLC-C003 Operator's Manual

2> Press the Live Time button to set the times for the current step,
or the Next Time button for the next step. The Live and Next step
numbers are shown on the display.
3> Use softkeys A-G to set the times you want (see page 98 for
description of the times)
4> Press Enter to save the settings, Exit to abandon them, or the ML
Menu button to toggle the step mode between Simple/Complex
(Simple = use the global timings).
5> Press the Stop button to Pause the chase then press Next or Prev
to move through steps of the chase. .
• The Review button shows you the step you have just edited,
including all the fades. When you press Review, the chase jumps
back to the step before the one you are on, then runs the step you
have edited to show you the overall result. The chase does not
have to be stopped to use Review.
• To insert a new step at the current point in the chase: Set up the
lights how you want them for the new step, then press the blue
Insert button, then press Enter. (If you want to insert a different
step number, type it before pressing Enter). The Set Times menu
is displayed. Change the times if you want to, then press Enter to
insert the step.
7.4 Copy
7.4.1

Copying chases

You can copy a chase exactly the same as a memory – hold down the
Flash button of the chase you want to copy, then press the Swop
button of the playback you want to copy it to. The copied chase will be
linked to the original, and any changes made to either chase will affect
both chases.
If you want an unlinked copy, press the Photocopy button before
starting the copy.
7.5 Delete
7.5.1

Deleting chases

You can delete a chase exactly the same as a memory. Press the blue
Delete button, then press the Swop button of the playback containing
the chase. Press the swop button again to confirm the delete.
7.5.2

Deleting a step from a chase

You can delete a step from the connected chase by pressing the blue
Delete button, typing the step number to be deleted, pressing Enter
then A [Yes].
You can also delete a step when a chase is Unfolded by pressing D
[Delete] then the Swop button for the step you want to delete.
Page 105 of 163