IBM 22P9176 User Manual page 28

4-2
IBM USB 2.0 Portable Multi-Burner: User's Guide
5 Power/Busy indicator
6 Write indicator
7 Eject button
The green LED indicates the power status and the operation
states of the drive.
v LED is on: when the drive is connected in any of the
supported power configurations and the USB port of your
computer.
v LED is on: during data write
v LED blinks: during data read
v LED is off: when the drive is not connected to the USB port
The amber LED indicates the write state of the drive.
v LED blinks: during data write
v LED is off: when data write is not in operation
Press this button to open the top cover.
Attention: An electrical locking mechanism is used in this
drive so that an erroneous operation does not open the top
cover during write. Make sure that the power is on and the
drive is not in operation before pressing the eject button to
open the top cover.
If the top cover cannot be opened even when the eject button
is pressed or if the top cover needs to be opened when power
is not supplied from the AC adapter, use the emergency eject
lever at the bottom of the drive.
Check that nothing is placed on the top cover when ejecting.
When normal ejection is impossible, an error message may
appear on your computer. When ejection is not performed
normally, open the top cover manually and close it securely
after removing anything that may be on the cover.