Configuration 3: Auxiliary Usb Power Configuration - IBM 22P9176 User Manual

Usb 2.0 portable multi-burner
Table of Contents

Advertisement

Configuration 3: auxiliary USB power configuration

The auxiliary USB bus power configuration can be used on select IBM ThinkPad
computers equipped with the IBM powered USB 2.0 port.
Requirements
v IBM powered USB 2.0 cable assembly (shipped with this option); IBM Part
v IBM powered USB 2.0 port
Specifications
Read and write CD and DVD media are supported.
Connecting the Multi-Burner using configuration 3
To connect the Multi-Burner to your system, complete the following procedure.
Refer to Figure 1-3 during installation.
Figure 1-3. Configuration 3: auxiliary USB power configuration
1. Turn on your computer.
2. Using the USB cable A , insert the cable plug 1 into the USB connector of
3. Slide the two connectors 2 together and insert the stacked USB and auxiliary
4. Connect the other end of the cable B to the drive by inserting the plug 3
1-6
IBM USB 2.0 Portable Multi-Burner: User's Guide
Number 22P9189
A
B
the drive while squeezing the two buttons on the connector.
power connector into the powered USB 2.0 port on your computer (found on
select IBM ThinkPad systems).
into the DC IN connector on the Multi-Burner.

Advertisement

Table of Contents
loading

Table of Contents