Chapter 4. Preparing To Use The Multi-Burner - IBM 22P9176 User Manual

Chapter 4. Preparing to use the Multi-Burner

Before using the Multi-Burner, follow the procedure below:
1. Make sure the Multi-Burner is properly connected to your ThinkPad computer.
2. Check the locations of the functions on the Multi-Burner (refer to the figures
3. Insert the IBM USB 2.0 Portable Multi-Burner Software and User's Guide Super CD
4. Double-click on the application you want and follow the instructions on the
5. Check that the drive operates normally and keep the enclosed warranty in a
Check that nothing is placed on the top cover when ejecting a CD or DVD. When
normal ejection is impossible, an error message may appear on your computer.
When ejection is not performed normally, open the top cover manually and close it
securely after removing anything that may be on the cover.
Following are the locations of the functions on the Multi-Burner:
© Copyright IBM Corp. 2003
below).
that was shipped with this option to install the CD-R/CD-RW/DVD writing
software.
screen.
safe place after filling it in.
1 Top cover
2 Disc tray
3 USB connector
4 DC IN connector
The top cover must be closed to play a disc.
Set the media with the label face up on the disc tray.
Insert the plug of the provided dedicated USB cable.
Connect the provided AC adapter or cable assembly DC IN
connectors. This drive can also be used under USB Power
Only with certain limitations (refer to "Configuration 3:
auxiliary USB power configuration" on page 1-6.)
4-1