Slx Programming; Slx4 Receiver Programming - Shure SLX User Manual

SLX Programming

888.888
GROUP CHANNEL MASTER LIST
MHz
GROUP
AUTO MANUAL DISPLAY EXIT
CHANNEL SELECT CHANNEL FREQUENCY MASTER
SELECT SELECT SELECT LIST
888.888
GROUP CHANNEL MASTER LIST
MHz
AUTO GROUP MANUAL DISPLAY EXIT
CHANNEL SELECT CHANNEL FREQUENCY MASTER
SELECT SELECT SELECT LIST
888.888
MASTER LIST
GROUP CHANNEL
MHz
AUTO GROUP MANUAL DISPLAY EXIT
CHANNEL SELECT CHANNEL FREQUENCY MASTER
SELECT SELECT SELECT LIST
888.888
MASTER LIST
GROUP CHANNEL
MHz
GROUP
AUTO MANUAL DISPLAY EXIT
CHANNEL SELECT CHANNEL FREQUENCY MASTER
SELECT SELECT SELECT LIST
888.888
GROUP CHANNEL MASTER LIST
MHz
AUTO GROUP MANUAL DISPLAY EXIT
CHANNEL SELECT CHANNEL FREQUENCY MASTER
SELECT SELECT SELECT LIST
888.888
MASTER LIST
GROUP CHANNEL
MHz
AUTO GROUP
MANUAL DISPLAY EXIT
CHANNEL SELECT CHANNEL FREQUENCY MASTER
SELECT SELECT SELECT LIST
FULL
CHANNEL MASTER LIST
GROUP
MHz
AUTO GROUP MANUAL DISPLAY EXIT
SELECT
CHANNEL CHANNEL FREQUENCY MASTER
SELECT SELECT SELECT LIST
Any option displayed on screen will generally "time out" after five seconds.

SLX4 Receiver Programming

Group Selection
ANTENNA
Allows manual selection of a frequency group. Pressing select increases the group number
A
B
by one. When the correct frequency is displayed, either wait five seconds for the screen to time
LOW BATT
out, or press sync. For best results when operating multiple systems, set all systems to a single
group; then set each system to a unique channel within that group.
For more information on frequency groups and channels, see
page 2.
Manual Channel Selection
ANTENNA
Allows manual selection of a frequency channel. Pressing select increases the channel num-
A
B
ber by one.When the correct frequency is displayed, either wait five seconds for the screen to
LOW BATT time out, or press sync.
Display Frequency
ANTENNA
Displays the current frequency in MHz for approximately 5 seconds. Press and hold to in-
A
B
crease display length.
LOW BATT
Lock or Unlock Receiver Settings
ANTENNA
Hold down the select key and press menu to lock or unlock the receiver. When locked, the
A
B
current receiver settings cannot be changed.
LOW BATT
Antenna Status
ANTENNA
Indicates RF activity. Only one antenna is active at any one time.
A B
LOW BATT
Transmitter Battery Status
ANTENNA
Indicates a low transmitter battery charge.
A
B
LOW BATT
Full Group Warning
ANTENNA
The FULL warning indicates that all available channels in the currently selected group are in
A B
use. When this occurs, reprogram all systems to an alternate group.
LOW BATT
Press either the menu or select button to exit the warning screen.
2x
menu select
3x
menu select
4x
menu select
+
select menu
9
sync
"Frequency Band Selection"
sync
English
on