Information Codes - Samsung DV48H7400E DV48H7400G User Manual

troubleshooting
probleM
Shuts off before load is dry
lint on clothes
Garments still wrinkled after
Wrinkle release
odors remain in clothing
after air fluff.

InformatIon coDES

Information codes may be displayed to help you understand what is occurring with your Dryer better.
error display
The thermistor resistance is very low
te
or high.
Invalid heating Temp in running the
he
dryer).
Running the dryer with door open.
de
Invalid power source Frequency.
Fe
Electronic Control Problem
9e1
(Over Voltage Error).
Electronic Control Problem
ae
(Communication Error).
Invalid state of Eeprom
eee
Communication.
Invalid door.
dF
For any codes not listed above, call 1–800–726–7864 (1–800–SAMSUNG).
soluTion
• The dryer load is too small. Add more items or a few towels and
restart the cycle.
• The dryer load is too large. Remove some items and restart the dryer.
• Make sure the lint filter is cleaned before every load. With some loads
that produce high amounts of lint, it may be necessary to clean the
filter during the cycle.
• Some fabrics are lint producers (for example, a fuzzy white cotton
towel) and they should be dried separately from clothes that are lint
trappers (for example, a pair of black linen pants).
• Divide larger loads into smaller loads for drying.
• Check pockets thoroughly before washing and drying clothes.
• Small loads of 1 to 4 items work best.
• Load fewer garments. Load similar-type garments.
• Fabrics containing strong odors should be washed in a normal cycle.
Meaning
English - 30
soluTion
Clean the screen or vent.
If the problem continues, call for service.
Call for service.
Close the door and then restart.
If the problem continues, call for service.
Try restarting the cycle.
If the problem continues, call for service.
Call for service.
Call for service.
Call for service.
Call for service.