Table of Contents
Advertisement
eral Motors product or a Dodge Dakota pickup, please call Directed
Electron ics Technical Support for an alternative shut-down method.
Do not return the vehicle to the customer until this feature is properly
installed!
D2D and programmer interface
The 4-pin red port is for interfacing with an XK module through D2D, or
you can use it for programming with the Bitwriter®.
If the XK module is unplugged so the port can be used for Bitwriter®
programming, you must unplug the heavy gauge 6 pin remote start
harness before reconnecting the xk module back in. Once the xk mod-
ule has been plugged in, reconnect the heavy gauge 6pin remote start
harness and proceed to reprogram the xk module.
When the learn routines have previously been programmed using
the Bitwriter®, they may have been locked.
Before proceeding with reprogramming the learn routines, they must
be unlocked with the Bitwriter®, this cannot be done manually with the
Valet switch.
25
© 2008 Directed Electronics. All rights reserved.
Hide quick links:
Advertisement
Table of Contents
