Control Elements - Behringer Foot Controller FCV100 User Manual

FOOT CONTROLLER FCV100

2. CONTROL ELEMENTS

Fig. 2.1: FCV100 controls (part 1)
By switching into “NORM” mode, the FCV100 is capable of
controlling the volume of two individual musical instruments.
Signals from INPUT 1/2 are led to OUTPUT 1/2. In “CV” mode the
FCV100 can control modulation and volume levels of other musical
instruments by connecting OUTPUT 2 to the volume or modulation
input of the instrument. In “CV” mode, when OUTPUT 2 is in use,
INPUT/OUTPUT 1 can still be used for controlling the volume of
another instrument, similar to “NORM” mode. All connections are
made with standard 1/4" TRS plugs.
In “NORM” mode, these jacks are used to feed separate instrument
inputs with the FCV100’s input signal. If you only use OUTPUT 2
in “CV” mode, the FCV100 functions as a CV controller.
Turning the MIN VOL control fully clockwise will increase the
volume at the minimum setting. This allows you to set the volume
range.
You can set the volume level by either turning the volume level
control or by pressing the pedal until you reach the desired
volume level.
2. CONTROL ELEMENTS
3