Behringer Foot Controller FCV100 User Manual

Behringer Foot Controller FCV100 User Manual

Foot controller
Hide thumbs Also See for Foot Controller FCV100:

Advertisement

User’s Manual
Version 1.2 July 2003

Advertisement

Table of Contents
loading

Summary of Contents for Behringer Foot Controller FCV100

  • Page 1 User’s Manual Version 1.2 July 2003...
  • Page 2: Safety Precautions

    Follow all safety precautions and keep operation instructions for future reference. Damage: Take care not to drop your FCV100 as this can lead to severe damage. BEHRINGER assumes no liability for any damage caused by the user.
  • Page 3: Control Elements

    1/4" TRS plugs. In “NORM” mode, these jacks are used to feed separate instrument inputs with the FCV100’s input signal. If you only use OUTPUT 2 in “CV” mode, the FCV100 functions as a CV controller. Turning the MIN VOL control fully clockwise will increase the volume at the minimum setting.
  • Page 4 FOOT CONTROLLER FCV100 Fig. 2.2: FCV100 controls (part 2) When the battery LED indicator dims or does not light up, you need to replace the battery. For instructions on how to replace the battery, please refer to chapter 3 “BATTERY INSTALLATION &...
  • Page 5: Battery Installation And Replacement

    FOOT CONTROLLER FCV100 The FCV100 can be operated via an 12 V DC power adapter or with a 9 V battery (Type 6LR91). If you use a battery and the power adapter at the same time, the FCV100 draws no power from the battery.
  • Page 6: Specifications

    Weight approx. 650 g (1.43 lbs) BEHRINGER is constantly striving to maintain the highest professional standards. As a result of these efforts, modifications may be made to existing products from time to time without prior notice. Specifications and appearance may therefore differ from those listed or shown.
  • Page 7: Warranty

    § 3 and 4, BEHRINGER shall, at its discretion, either replace or repair the product using suitable new or reconditioned parts. In the case that other parts are used which constitute an improvement, BEHRINGER may, at its discretion, charge the customer for the additional cost of these parts.
  • Page 8 5. Any repair or opening of the unit carried out by unauthorized personnel (user included) will void the warranty. 6. If an inspection of the product by BEHRINGER shows that the defect in question is not covered by the warranty, the inspection costs are payable by the customer.

Table of Contents