Get Started - Assembly - SodaStream Revolution Instruction Manual

Get Started – Assembly
1
Place soda maker on flat, sturdy
surface, in an upright position.
Remove packaging materials.
WARNING: DO NOT use the
machine on its side as it could
accumulate a dangerous
level of CO in the bottle.
2
Remove back cover: depress
cover-release button. Grasp
back cover and pull away from
unit. Set cover aside.
4
Turn carbonator clockwise
until it stops. Hand-tighten
only;
DO NOT use tools.
2
Adapter
Remove seal and cap from
carbonator. Insert 60L carbonator
into base. If using 33-ounce
(130-liter) carbonator, remove
adapter from base before
inserting carbonator. If using a
14.5-ounce (60-liter) carbonator,
make sure adapter is securely in
place. Failure to do so may result
in damage to cylinder holder
when attaching cylinder.
5
Reinstall back cover: tilt back
cover toward you; insert bottom
into slot and push the cover
into place.
3
Carbonator
Valve
Tip soda maker forward.
Position carbonator valve
under fitting.
11