Remote Starting Diagnostics - Viper 5901 Installation Manual

7 flashes
8 flashes
9 flashes
10 flashes
11 flashes
* Timer mode error: Ignition is on or shutdown input is active when activating
timer mode.
Turbo mode error: Turbo mode is programmed off, engine is not on or
shutdown input is active.
Manual mode error: MTS mode not enabled.
** Alarm was triggered during remote start sequence.

Remote starting diagnostics

When the remote start function is activated and the 2-way remote emits an error
tone; you have the ability to see what the cause of the no-start situation is by
counting the amount of flashes of the parking lights from the vehicle.
5 flashes
6 flashes
7 flashes
8 flashes
© 2008 Directed Electronics. All rights reserved.
Timer mode/Turbo mode/Manual mode error *
Neutral safety shutdown
Low battery (voltage mode)
Alarm triggered **
Wait-to-start input timed out
Brake wire is active
Hoodpin wire is active
Manual transmission
initialized.
Neutral safety wire has no ground or the neutral safety
switch is Off.
mode is enabled and not
57