Heavy Gauge Remote Start, (H3) 10-Pin Connector; Remote Start Input, 5-Pin Connector; Remote Start Auxiliary Output, 5-Pin - Viper 5901 Installation Manual

➢ Heavy gauge remote start, (H3) 10-pin connector

H3/1 PINK
H3/2 RED/WHITE
H3/3 ORANGE
H3/4 VIOLET
H3/5 GREEN
H3/6 RED
H3/7 PINK/WHITE
H3/8 PINK/BLACK
H3/9 RED/BLACK
H3/10 NC (no connec-
tion)

➢ Remote start input, 5-pin connector

1 BLACK/WHITE
2 VIOLET/WHITE
3 BROWN
4 GRAY
5 BLUE/WHITE

➢ Remote start auxiliary output, 5-pin

1 PINK/WHITE
2 ORANGE
3 VIOLET
4 PINK
5 BLUE
Note: Wires 1 - 4 on the remote auxiliary outputs are wired to the (-) triggers for
12
(+) IGNITION 1 INPUT/OUTPUT
(+) FUSED (30A) IGNITION 2 / FLEX RELAY INPUT 87
(+) ACCESSORY OUTPUT
(+) STARTER OUTPUT (CAR SIDE OF THE STARTER KILL)
(+) STARTER INPUT (KEY SIDE OF THE STARTER KILL WIRE)
(+) FUSED (30A) IGNITION 1 INPUT
(+) IGNITION 2 / FLEX RELAY OUTPUT
(+) FLEX RELAY INPUT 87A key side (if required) of FLEX
RELAY
(+) FUSED (30A) ACCESSORY/STARTER INPUT
NC
(-) NEUTRAL SAFETY SWITCH INPUT
TACHOMETER INPUT WIRE
(+) BRAKE SHUTDOWN INPUT WIRE
N/O or N/C (-) HOOD PIN SWITCH INPUT
(-) 200 mA 2ND STATUS/REAR DEFOGGER OUTPUT
(-) 200mA FLEX RELAY CONTROL OUTPUT
(-) 200mA ACCESSORY OUTPUT
(-) 200mA STARTER OUTPUT
(-) 200mA IGNITION 1 OUTPUT
(-) 200mA STATUS OUTPUT
© 2008 Directed Electronics. All rights reserved.