Pride Celebrity X-6 Owner's Manual page 31

V I I .
SEAT ROTATION
The seat rotation lever will lock the seat into several posi-
tions.
1. Push forward on the seat rotation lever to unlock
the seat. See figure 17.
2. Rotate the seat to the desired position.
3. Release the lever to lock the seat into place.
FRONT-TO-BACK SEAT ADJUSTMENT
You can reposition the seat forward or rearward
to adjust the distance between the seat and the
tiller. See figure 17.
1. Move the seat sliding lever outward.
2. While holding the lever out, slide the seat forward
or rearward.
3. Release the seat sliding lever once the seat is in
the desired position.
SEAT HEIGHT ADJUSTMENT
The seat can be repositioned to different heights. See
figure 18.
1. Remove the seat and shroud from your scooter.
See VIII. "Disassembly and Assembly."
2. Remove the seat height adjustment bot.
3. Loosen the clamp-action bolt.
4. Raise or lower the upper seat post to the desired
seat height.
5. While holding the upper seat post at that height,
match up the locating holes in the upper seat post
with those of the lower seat post.
6. Insert the seat height adjustment bolt through the
locating holes of both the upper and lower seat
posts.
7. Reinstall the nut onto the seat height adjustment bolt
and tighten
8. Tighten the clamp-action bolt
9. Reinstall the rear shroud and the seat.
Celebrity X-6
C O M F O R T
www.pridemobility.com
A D J U S T M E N T S
SEAT SLIDING LEVER
Figure 17. Seat Adjustment Levers
NUT
NUT
Figure 18. Seat Height Adjustment
SEAT ROTATION LEVER
UPPER SEAT
POST
LOCATING
HOLES
SEAT HEIGHT
ADJUSTMENT
BOLT
CLAMP-ACTION
BOLT
LOWER SEAT POST
31