Table of Contents
Advertisement
All unit models have the FR - 1 & FR - 2 filter position option available. Both positions use the
same filters per model shown in the chart above.
◆ Installation of air filter
1
Remove the cover plate (Screw x 3).
Cover plate
CAUTION
The cover plate is attached temporarily with the screws
indicated by the arrows for protection when shipped.
After reattaching it, seal the screw holes with tape
instead of using the screws.
13-EN
Two positions for filter rack
Indoor unit
FR-2
Cover plate fixing
screws
Cover plate for filter
slot
– 7 –
2
Pull out the filter rack, and set the air filter (locally procured) in it.
FR-1
Air filter
(locally procured)
3
Push the filter rack in fully and reattach the cover plate. (Screws x 2)
Filter rack
Air filter
(locally procured)
Screws
14-EN
Hide quick links:
Advertisement
Table of Contents
