Using Quicknozzles; Using Detergents - Hyundai HCP3000 User Manual

4.5 Using QuickNozzles

This pressure washer includes five angle nozzles that affect the spray angle of the
water. These can be changed to suit the task.
Do not install or change nozzles until the engine is running. Pressure created
during the start-up procedure cannot be released if nozzles are installed.
1. Disconnect the high-pressure hose from the spray gun base.
2. Rotate the spray wand so the nozzle is facing up. Depress the quick
connector on the wand to release the QuickSwap nozzle.
3. Insert desired nozzle and press firmly until it clicks into place.
4. Reconnect high-pressure hose.

4.6 Using Detergents

Do not use the angle nozzles when using a soap detergent. Use the detergent
nozzle to avoid detergent and foam buildup and to ensure an even spray.
Detergent reservoir is not included with the HCP3000 pressure washer.
1. Insert detergent suction hose into detergent container.
2. Insert other end of detergent suction hose into the nipple located at the
top of the pump.
3. Install the detergent nozzle on the spray wand.
4. Follow start-up procedure to begin using the pressure washer.
22