TATA Motors Sumo Gold CR-4 Owner's Manual & Service Book page 103

Hide thumbs Also See for Sumo Gold CR-4:
Table of Contents

Advertisement

SR.
NO.
PROPELLER SHAFT
1
Grease propeller shaft with grease gun (at slip joint - splines end) & Check Centre bracket
mounting bolts for looseness. Tighten if necessary
AXLE
1
Change oil in axle (First at 15,000 KM, there after every 75,000 KM)
2
Change grease in rear hubs& adjust bearing play (only for TML axle)
3
Clean breather in Axle
SUSPENSION & STEERING
1
Grease idler arm (seal type idler arm)
2
Wheel alignment & balancing.
3
Apply torque on front suspension bolts.
4
Check condition of rubber bushes in the following & replace if necessary. 1) Top wishbone
2) Lower wishbone 3) Anti roll bars 4) Leaf Spring
5
Check shock absorber, its bushes, replace if necessary
6
Grease steering spindle and sleeve
7
Check & adjust front wheel bearing play & Change grease in front hubs
8
Check steering gearbox oil level & top-up, if necessary (only for mechanical steering)
9
Change oil in power steering system & change filter element
10
All the suspension & steering ball joints to be checked for any rubber boot tear, attend if any.
CLUTCH & BRAKES
1
Check parking brakes, adjust if necessary
2
Check front brake pads & rear brake linings. Replace if necessary
3
Change Clutch & Brake Fluid (or 2 years whichever is earlier)
OPERATION
SERVICE SCHEDULE
FREQUENCY
(In km)
15000 km
75000 km
45000 km
Every Service
15000 km
Inspect if abnormal condition noticed or every 30000 km
whichever is earlier
Every Service
45000 km
30000 km
30000 km
45000 km
45000 km
75000 km
Every Service
15000 km
15000 km
30000 km
103

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sumo gold 4sptcSumo gold

Table of Contents