at the bottom label of each device.
Please enter the MAC address with capital letters.
Installing plug-in
For the initial access to the Network Camera in Windows, the web browser
may prompt for permission to install a new plug-in for the Network Camera.
Permission request depends on the Internet security settings of the user's PC
or notebook. If the highest security level is set, the computer may prohibit
any installation and execution attempt. This plug-in has been registered for
certificate and is used to display the video in the browser. Users may click on
to proceed. If the web browser does not allow the user to continue to
install, check the Internet security option and lower the security levels or
contact your IT or networking supervisor for help.