D-Link DFE-650 Series User Manual page 46

DFE-650 Series Fast Ethernet PC Card User's Guide
Note that in this step, you must name the next item of your
short list, rather than DFE650, which is used here only for
purposes of example.
6. Repeat Step 2 above, but before you REMARK the line which
invokes DFE650 (in the example case) you must undo the
editing previously done in Step 2. That is (in our example
case), delete the six letters REMARK from the beginning of
the line which invokes LSL (first item in your short list).
Then go ahead and REMARK the line which invokes the next
program named in your short list (DFE650 in our example
case). Immediately save, then exit from Edit.
7. Repeat Step 3
8. Repeat Step 4
9. If necessary, repeat Step 5.
10. Repeat Step 6
If You're Still Reading . . .
It's hard to guess why you might still be reading this
Troubleshooting section, but maybe it's because you are still having
trouble. So here is a little bit of clarification to the above procedure
description. The example references (to LSL and DFE650) will
only be useful in getting started on the cyclic pattern of the above
instructions. After you are well into the rhythm of it, the example
references are best ignored because they are specifically
appropriate to the initial passes. By the time you get to testing the
third item in your short list, the example references in the above
description will be excess baggage –– refer only to your short list.
You Are Now an Uncertified Expert!
If you are not still having trouble, but you are still reading, then
maybe it is because you are simply excited about your success in
38
Troubleshooting