D-Link DFE-650 Series User Manual page 19

avoid damage when detaching the plug from the DFE-650, it
is necessary to depress the latch wings of the plug. See
the following section, "Remove Ethernet PC Card."
Step 3 Connect to the Network Medium
Make the network connection by running a UTP cable from the
supporting hub to your media coupler. Simply plug one end (RJ-45
connector) of the cable into an available hub port, and plug the
other end (RJ-45 connector) into the RJ-45 socket of the media
coupler.
Ethernet / Fast
Ethernet Hub
UTP cable connecting media coupler to the supporting hub
Hardware Installation
DFE-650 Series Fast Ethernet PC Card User's Guide
Media Coupler
RJ-45 Connectors
UTP Cable
11