Table of Contents
Advertisement
APPENDIX C: ERROR MESSAGE LIST
ERROR MESSAGE
DISK ACCESS ERROR!
UPDATE FILE ERROR!
FIRMWARE UPGRADE
FAILED
MEDIA ACCESS FAIL!
NO FILE!
USB DEVICE NOT FOUND
NO USB
BACKUP START TIME
ERROR
BACKUPEND TIME ERROR
DISK ERROR
FAN FAILED
NO LOG DATA
SCHEDULE RECORD
ERROR STATUS & REASON
H.D.D. Data structure Un-normal.
Data does not record into HYBRID DVR or bad sector on
HYBRID DVR H.D.D. Please install another H.D.D. and
perform the record again.
Please re-download the update file and update again.
Please reboot the HYBRID DVR and upgrade the firmware.
Please send the HYBRID DVR back to repair when
HYBRID DVR is disability.
The USB file format is incorrect (Please format the pen
drive to FAT32) or Pen Drive is setup to ONLY READ mode
(Please annul ONLY READ mode) when reserve the data by
using Pen Drive. The data cannot be burn into CD/DVD
disc. Please change another CD/DVD disc and backup the
file in CD/DVD disc storage.
There is no upgrade file within Pen Drive or the name of
upgrade file does not correspond with HYBRID DVR
format. Please adjust the upgrade file name based on the
following information.
16CH -> UpdateR.bin
08CH -> Update8.bin
04CH -> Update4.bin
Pen Drive undetected. Please Unplug the Pen Drive and plug
it again.
Backup start time error.
Backup end time error.
The data cannot be burn into CD/DVD disc. Please change
another CD/DVD disc and backup the file.
Fan Error Warning.
No Events Record.
The condition is caused by trying to stop recording when
perform the schedule record. Please setup the record to
manual mode and then stop the record.
NOTE
82
Advertisement
Table of Contents
