Table of Contents
Advertisement
640 X480
1920 x 1080
1920 x 1080
1920 x 1080
c. ROI
This function allows users to set up the channel as an attached channel. An
attached channel is based on a normal/ RTSP channel has been set up, and
can display the same live view as the normal/ RTSP channel. The attached
channel is not physically linked to any camera, so it doesn't increase the
bandwidth loading. Users cannot do camera setup (like motion detection or
image adjustment) on attached channel.
1. Enable: Choose "Attached".
2.
Ratio: Use the arrows to adjust the zoom ratio, and press the red frame to drag it
to the area that you want it to show on the live view screen.
A-2. Connect IPCAM：After insert the IPCAM related information, click this button
Note: To the camera connected via ONVIF protocol, the PTZ control function is
not supported.
OK.
DVR takes 1920x1080 streaming for single
channel view, and 640x480 streaming for
split screen.
Error Message: "Invalid Substream
Resolution! Please modify IPCam."
DVR takes 1920x1080 streaming for both
single channel view and split screen.
However, it can only allow 640x480
resolution for split screen, so it shows error
in return.
Attached Channel: Select a connected normal/ RTSP
channel in the drop-down menu.
to test the connection circumstances.
20
Advertisement
Table of Contents
