Table of Contents
Advertisement
C-1. Display
Use the mouse to enable or disable the camera display on the screen or not.
C-2. Switch Dwell
Press ◄ or ► to change auto switch second. The value is between 0~99 sec.
C-3. Title
Use the mouse to setup the title of connecting IP device.
C-4. Contrast
Press ◄ or ► to change contrast level. The adjustment value is between 0~255
C-5. Brightness
Press ◄ or ► to change brightness level. The adjustment value is between
0~255
C-6. Hue
Press ◄ or ► to change hue level. The adjustment value is between 0~255
C-7. Saturation
Press ◄ or ► to change saturation level. The adjustment value is between
0~255
C-8. Sharpness
Press ◄ or ►/ mouse wheel to change sharpness level. The adjustment value is
between 0~15
D. Motion Setup
Camera Type in Analog-CAM
D-1. Relay Dwell
Press ◄ or ► to change the relay time or disable relay function.
D-2. Buzzer Dwell
Press ◄ or ► to change the buzzer time or disable buzzer function.
D-3. Motion Detection
Click the checkbox to decide enable or disable motion detection.
D-4. Sensitivity
Press ◄ or ► to change sensitivity level.
D-5. Motion Area Setup
Press
to setup motion area.
22
Advertisement
Table of Contents
