Table of Contents
Advertisement
E.
AUDIO VOLUME
Press this button, and the audio volume control board will pop up.
F.
AUTO SWAP
Press it to start auto swap. The interval depends on the setting in IPCam Image Setup
when it's on single channel view. For split screen the switch dwell interval is 5 sec
G.
DISPLAY CONTROL
Within live-viewing or playback mode, use display control to switch the camera
channel.
H.
RECORD AND PLAYBACK CONTROL
Same as front panel controller and remote controller.
I.
SOUND OUTPUT / PTZ CONTROL
There are little icon on the right top of the live vide of every channel. Click
enable the sound output. Click
those functions are not support by the camera linked, you will not see the
corresponding icons.
The sound options do not affect the audio recorded into playback video. As long as the
audio setup is enabled, the playback video includes audio even the sound output here
is turned off.
J. RECORDING STATUS
Beneath the date and time, it displays the current recording type:
Record mode: Schedule – NO REC period
to PTZ call out the control board. Note that if
to
15
Advertisement
Table of Contents
