Linkcom Link View HNVR16 User Manual page 68

A-4. System – Status Display A-4. System – Status Display A-4. System – Status Display
Select the items that will be displayed on local DVR. Select the items that will be displayed on local DVR. Select the items that will be displayed on local DVR.
A-5. System – System Setup A-5. System – System Setup A-5. System – System Setup
DVR ID: The ID is used for distinguish DVRs when you use remote controller or DVR ID: The ID is used for distinguish DVRs when you use remote controller or DVR ID: The ID is used for distinguish DVRs when you use remote controller or
RS485. Give different ID when you have several DVRs. RS485. Give different ID when you have several DVRs. RS485. Give different ID when you have several DVRs.
Date Format: Select a format of date display. Date Format: Select a format of date display. Date Format: Select a format of date display.
B-1. Camera – Camera Setup B-1. Camera – Camera Setup B-1. Camera – Camera Setup
Analog Camera: Analog Camera: Analog Camera:
After connecting the analog camera to DVR, select "Analog Camera" of After connecting the analog camera to DVR, select "Analog Camera" of After connecting the analog camera to DVR, select "Analog Camera" of
corresponding channel. corresponding channel. corresponding channel.
IP Camera, Normal Mode: IP Camera, Normal Mode: IP Camera, Normal Mode:
Under Normal mode, Http protocol is used to access camera. Under Normal mode, Http protocol is used to access camera. Under Normal mode, Http protocol is used to access camera.
You can key in IP address, port, username, and password manually. You can key in IP address, port, username, and password manually. You can key in IP address, port, username, and password manually.
You can either use IP Installer to scan the LAN and find the camera: You can either use IP Installer to scan the LAN and find the camera: You can either use IP Installer to scan the LAN and find the camera:
67 67 67