Linkcom Link View HNVR16 User Manual page 19

A-1. IPCam Quick Search
Press the "IPCam Quick Search" button and click "Search Device" button in the
following, DVR will search the IPCAM devices which IP address are setup as
the same domain as DVR IP address. Moreover, click the IPCam device which
from the list can import the device information to the channel automatically
without any manual key-in step.
The IPCam has to be under the same LAN with DVR in order to connect
successfully. Ex. If DVR IP address is 192.168.10.33, IP Cam IP address should
be 192.168.10.X. You can edit IP Cam IP address here or on the IP Cam.
a. Normal Mode
Enable this channel. Key in the IP address, port, username, and password of
the device you prepare to connect. You can find the information on the IP
Cam.
Click the "connect IPCAM" button, the message will show in "State" column
to tell you whether connection succeeds or not.
Note: To the camera connected via ONVIF protocol, the PTZ control function
is not supported. Note: To the camera connected via ONVIF protocol,
the PTZ control function is not supported.
b. RSTP Mode
Under RTSP Mode, the DVR only support the IP address indication, the live
video, and video recording. Other functions like motion detection are not
supported.
18